Brookfield RST Rheometer Manual do Utilizador descarregar pdf (Página 29)

Brookfield Engineering Labs., Inc. page 29 Manual No. M14-223

has been turned on. If you see the following MEAS SYS SN:0 the explanation is that either the spindle

with bar code was not recognized or the spindle does not have a bar code.

Push OK to go to the next screen which gives the summary of test parameters.

Push OK to go to the next screen which shows three icons: MATH, QC, REPORT

Push OK to go to the next screen which shows test information for the first measuring point in the

completed test. Use the RIGHT ARROW to go forward from the first measuring point to the second

measuring point. Continue using the RIGHT ARROW to review all the measuring points in the test file or

the LEFT ARROW if you need to go backwards in the test.

The icons at the bottom provide choices for TABLE and GRAPH.

Click on TABLE to review the test measuring points in tabular format. The UP and DOWN arrows allow

you to review all of the measuring points in the test.

Click on GRAPH to review the graphical data for the completed test. The Y1-axis is the viscosity data, the

Y-2 axis is the temperature data and the X-axis is time. It is not possible to change the identities for each

axis.

Click on MATH to review maximum average and minimum viscosity values for the completed test.

III.2 Languages

User screens for the RST Rheometer are available in the following languages; click on SETTINGS on the

home screen (main menu), then click on LANGUAGE:

• German

• English

• Chinese

In future versions, the following languages will be implemented:

• Japanese

• French

• Polish

• Portuguese

• Russian

• Spanish

Figure III-15

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 68 69

Sem comentários

Brookfield RST Rheometer Manual do Utilizador Página 29