Brookfield R/S CPS Rheometer Manual do Utilizador descarregar pdf (Página 43)

BrookeldEngineeringLabs.,Inc. Page43 ManualNo.M08-218-B0212

When all parameters have been selected, the new parameters are displayed:

RS232: 19200,8,n,1

<OK>=storing

Accept the set parameters by pressing the

key.

The new settings are now stored and will remain in the rheometer memory even after switch-

ing off the instrument.

VI.7.6 Conguration→ Language

This function selects the user language of the R/S-CPS+ Rheometer. Available languages are:

• German

• English

Select the desired language and press the

key. The selected language will be preserved

in the instrument even after it is switched off.

VI.7.7 Conguration→ Service

These functions are for service personnel only. Password-protected!

VI.8 Serial Data Transfer via the RS232 Interface

Serial data transfer should only be done when the user of the rheometer has basic knowledge

of data processing and is capable of changing the data transfer parameters on the sending and

receiving sides.

Data can only be transferred successfully when the transmitter (R/S-CPS+ Rheometer) and receiver

(e.g. a PC) fulll the following requirements:

1. The instruments are properly connected by the interface cable which is delivered with the

instrument. Caution:Bothinstrumentsmustbeswitchedoffwhiletheconnectionis

made! (see Appendix A.3).

2. The transmitter (R/S-CPS+ Rheometer) and the receiver are set to identical data transfer pa-

rameters (for R/S-CPS+ Rheometer, see Section VI.7.5: Conguration→RS232 Parameters).

3. The receiver has enough computing and memory capacity to receive or store the data.

The following example demonstrates reception by means of the terminal program under Micro-

soft™ Windows.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 61 62

Sem comentários

Brookfield R/S CPS Rheometer Manual do Utilizador Página 43