
Brookeld Engineering Laboratories, Inc. Page 94 Manual No. M/98-211-B0104
Brookeld Engineering Laboratories, Inc. Page 94 Manual No. M98-211-E0912
Note: Continuous print mode may be used in conjunction with Timed Stop to
print data throughout the time period. Printing will occur only during
the test.
S TIMED AVERAGE
The DV-III Ultra will collect a specied number of data points over a period of time and present
the average reading (arithmetic average). Time, speed and the number of data points are entered
using the number keys and
OPTIONS/TAB key. The test will begin immediately upon the press of
the
ENTER key. Non-averaged data will be displayed during the test.
The test will end when the specied time interval has elapsed. The averaged data point will be
shown as displayed in Figure V-7. The SELECT DISP key can be used to view the average value of
all measurement parameters. The
PRINT key can be used to send a single averaged dataline to the
printer.
DATA AVERAGING
300 READINGS WERE
AVG'D OVER 02:30 M:S
AVERAGE TORQUE=90.3
Figure V-7
Note: Printing during a Timed Average test will show non-averaged data.
Averaged data is available only at the conclusion of the test. Printing the
averaged data must be done with the PRINT key at the end of the test.
Comentários a estes Manuais