Brookfield DV2+Pro Viscometer Manual do Utilizador descarregar pdf (Página 39)

Brookeld Engineering Labs., Inc. Page 39 Manual No. M03-165-F0612

Activating print selections in the Print mode can only be done by exiting to the main menu and

pressing the

PRINT keyforfour(4)seconds.“P%”willashinfrontofthetorquereading,conrming

that you are now in the Print Interval mode. Pressing

PRINT for one (1) second thereafter will

disable the Print mode and remove the “P%” from the display.

IV.3.4 PC Program (On/O)

Note: ThisoptiondoesnotapplytousewithRHEOCALCsoftware.

This option causes the serial port of the DV-II+Pro viscometer to go into a high speed output

mode(approximately3printlinespersecond)forusewithBrookeldWINGATHER®software

program. When ON, you may enter the Options menu but will not be allowed to make any option

selections until the PC PROG is turned OFF. All front panel keys will function normally when

you turn the option ON and return to normal viscometer operation by pressing the MOTOR ON/

OFF/ESCAPE key. When OFF, the DV-II+Pro will return to the last set print time interval when

printing is resumed.

Note: WINGATHER® software can be used for data acquisition and

analysis. Rheocalc software can be used for complete external

control of DV-II+Pro and data acquisition.

FromtheOptionsmenu,scrolltothescreenshowninFigureIV-32:

SET PRINT TIME

DPC PROG OFF 

Figure IV-32

PresstheOPTIONS/TABkeytodisplayFigureIV-33:

SET PRINT TIME

DPC PROG ON 

Figure IV-33

Pressing the OPTIONS/TAB key would return you to the screen display of Figure IV-32. Repeated

pressing of the OPTIONS/TAB key would cause you to toggle back-and-forth between the displays

of Figure IV-32 and Figure IV-33.

To turn high speed output ON, press the ENTER/AUTORANGE key when the appropriate screen is

displayed. Then press the MOTOR ON/OFF/ESCAPE key to exit the Setup mode. This returns you

to the default screen display and resumes normal viscometer operation with high speed output

enabled and normal printer operation using the last entered print time interval.

Note: For access to B.E.V.I.S. option, PC PROG must be OFF.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 100 101

Sem comentários

Brookfield DV2+Pro Viscometer Manual do Utilizador Página 39